In this guide, we are going to show you how to remove the back cover on Huawei P10 smartphone. These removal instructions have been made into 3 easy to follow steps.
Teardown is what we do! Follow us on Facebook for the latest repair news.
The full teardown of the Huawei P10 can be found here.
Repair Tools Needed:
0.8 pentalobe screwdriver
Suction cup
Pick
Spudger
SIM Card Eject Tool
1. Removing the SIM card tray and two Pentalobe screws
First of all, switch off your phone and remove the SIM card tray.
Remove the two Pentalobe screws located at the bottom next to the device’s USB Type-C port.
2. Open the back cover
Use a suction cup to separate the display unit from the back cover.
Lift up the display a little bit with a suction cup and insert a pick.
Slide the pick along the display edge on both sides.
Don’t remove the back cover completely yet. The power button and volume button cable is still connected to the motherboard.
3. Disconnect the power button and volume button cable
Disconnect the power button and volume button cable using a spudger.
Now the back cover was removed completely.
You can find the full Huawei P10 Teardown here. Other parts replacement tutorial, please visit the P10 repair guide category.
Huawei P10 Display Assembly Removal & Replacement
Huawei P10 Battery Removal & Replacement
Huawei P10 Motherboard Removal & Replacement
How To Replace Huawei P10 Front Facing Camera
Hi, where can I buy the back cover replacement parts??
I found the back cover for huawei p10 is available on Chinese site taobao.com, but can not found it on ebay or other site.
What size pentalobe screwdriver do I need? One screw is out the other is turning but not coming out
What if you have 6pin holes together and 1 pin hole by the charger