Huawei P10Huawei Phone Repair

How To Remove Huawei P10’s Back Cover

In this guide, we are going to show you how to remove the back cover on the Huawei P10 smartphone.

Teardown is what we do! Follow us on Facebook for the latest repair news.

The full teardown of the Huawei P10 can be found here.

Repair Tools Needed:
0.8 Pentagonal screwdriver
Suction cup
Pick
Spudger
SIM Card Eject Tool

1. Removing the SIM card tray and two Pentalobe screws

First of all, switch off your phone and remove the SIM card tray.

Remove the two Pentalobe screws located at the bottom next to the device’s USB Type-C port.

2. Open the back cover

Use a suction cup to separate the display unit from the back cover.

Lift up the display a little bit with a suction cup and insert a pick.
Slide the pick along the display edge on both sides.

Don’t remove the back cover completely yet. The power button and volume button cable are still connected to the motherboard.

3. Disconnect the power button and volume button cable

Disconnect the power button and volume button cable using a spudger.

Now, the back cover was removed completely.

You can find the full Huawei P10 Teardown here. For other parts replacement tutorials, please visit the P10 repair guide category.

Huawei P10 Display Assembly Removal & Replacement
Huawei P10 Battery Removal & Replacement
Huawei P10 Motherboard Removal & Replacement
How To Replace Huawei P10 Front-Facing Camera

David Tian

David is the editor @ MyFixGuide. He loves technology, especially good at laptops and mobile phones. In his free time, he loves to take apart the latest mobile phones and laptops.

Related Articles

4 Comments

    1. I found the back cover for huawei p10 is available on Chinese site taobao.com, but can not found it on ebay or other site.

Leave a Reply

Your email address will not be published. Required fields are marked *

  −  2  =  6