Huawei Honor 6 PlusHuawei Mobile PhoneTeardown

Huawei Honor 6 Plus Teardown

In this guide, I’ll explain how to disassemble Huawei Honor 6 Plus to remove the back cover, battery, rear camera, front camera, speaker, headphone jack, light distance sensor and motherboard. Refer to this guide. You can repair your Huawei Honor 6 Plus.

Want to keep in touch with us? Follow us on Facebook for more repair news.

First of all, insert a guitar pick to pry up and remove the back cover.

Huawei Honor 6 back cover made of glass fiber.

The back cover has good toughness.

Remove all screws securing the middle frame.

Remove the top middle frame.

Remove the middle frame and graphite stickers.

Huawei Honor 6 Plus comes with a 3.8v 3500mah/13.3wh – 3600mah/13.68wh Li-polymer battery. Huawei model: HB4547B6EBC.

The 3.5mm headphone jack and the infrared transmitter port

Earpiece speaker, headphone jack and light distance sensor

Volume buttons and power button are integrated on a small board.

Rear camera and front camera

Camera fixed base

Skyworks 77344 GSM/EDGE RF chip

Hisilicon Hi6401 Audio decoder chip

Broadcom BCM47531 GNSS Location Chip, support GPS, GLONASS, QZSS, SBAS and BeiDou

Toshiba 16GB eMMC5.0 ROM

Hisilicon Kirin 925 1.8GHz processor + ELPIDA 3GB RAM

TriQuint TQP9058H power amplifier chip

AVAGO A924140 filter chip

Hisilicon Hi6361 4G LTE RF chip

Hisilicon Hi6421 Power management chip

Skyworks 13412 chip

Broadcom BCM4334 5GHz Wi-Fi + Bluetooth + FM Radio chip

Dual flash

Micro USB charging port

Vibrator module

Source: it168

Related Articles


  1. Where can I buy and how much is the front glass of the honor 6 plus?
    Is there a tutorial how to replace the glass?
    Would it be advisable to replace the battery as well?
    Thanks for your quick response.

Leave a Reply to Mitos Diño Cancel reply

Your email address will not be published.

29  +    =  37