This is a brand new screen for HP ProBook 440 G6, ProBook 445 G6, and ProBook 445R G6. It is compatible with HP L44572-001 (1920 x 1080) and L44576-001 (1366 x 768), please select the correct screen according to the resolution of your old screen, please click the following link to check the resolution of your original screen.
1. It is a 100% brand new screen.
2. It does not fit a 450 G6 with a touchscreen.
Size: 14.0-inch IPS screen
Resolution: HD (1366 x 768) or (1920 x 1080)
Backlight Type: LED
Surface Type: Matte
Video Connector: 30 pin, eDP
Condition: brand new, no dead pixel
Warranty: One (1) Year
ProBook 440 G6
ProBook 445 G6
ProBook 445R G6
1. Before you start to replace the touchscreen, please remove the bottom cover and disconnect the battery connector from the motherboard.
2. Insert your fingernail under the LCD bezel. Shake the LCD bezel and separate it from the LCD screen. Remove the bezel from your laptop.
3. Pull the tape out from behind both the left and right sides of the screen. You must pull the tape multiple times before it is completely removed.
3. Place the screen on the keyboard to access the video cable connector on the back of the screen.
4. Lift the tape from the display cable connector on the screen, lift the locking latch, and then disconnect the display cable from the screen.