New Screen for Asus ROG Zephyrus G14 2023 GA402XI GA402XU GA402XV GA402XY GA402XZ GA402NI GA402NJ GA402NU GA402NV

This is a new WUXGA WQXGA screen for Asus ROG Zephyrus G14 2023 GA402XI GA402XU GA402XV GA402XY GA402XZ GA402NI GA402NJ GA402NU GA402NV gaming laptops.

The Asus ROG Zephyrus G14 2023 has three screen specifications. Please select the screen specification from the drop-down menu as your original screen.

If you don’t know your screen specifications, please contact us via service@myfixguide.com

Note: Mini LED screens for the XS96 and NC0000 Series are currently out of stock!

Features:
1. The screen is a 100% new screen.
2. This screen has the same specifications as your original screen.
3. Each screen is rigorously tested to ensure that it has no bad pixels.

Compatible Laptops:
14″, 1920×1200 IPS 400nits 144Hz 100% sRGB Anti-glare, fit below models
GA402NJ-DS71-CA
GA402NJ-L4000 Series

14″, 2560×1600 IPS 500nits 165H 100% DCI-P3 Anti-glare, fit below models
GA402NI-N2000 Series
GA402NU-G14.R74050
GA402NU-N2000 Series
GA402NV-N2000 Series
GA402XI-G14.R94070
GA402XI-N2000 Series
GA402XU-N2000 Series
GA402XV-BS91-CB
GA402XV-G14.R94060
GA402XV-N2000 Series
GA402XY-N2000 Series
GA402XZ-CS94
GA402XZ-N2000 Series

14″, 2560×1600 Mini LED 600nits 165Hz 100% DCI-P3 Anti-glare, fit below models
GA402XI-009W
GA402XY-NC001W
GA402XY-NC042X
GA402XY-NC5W
GA402XZ-009W
GA402XZ-NC009W

Specifications:
14″ 1920×1200 IPS 400nits 144Hz 100% sRGB Anti-glare
14″ 2560×1600 IPS 500nits 165Hz 100% DCI-P3 Anti-glare
14″ 2560×1600 Mini LED 600nits 165Hz 100% DCI-P3 Anti-glare (Out Of Stock)

Aspect Ratio: 16:10
Condition: New, No Dead Pixels
Warranty: One (1) Year

Replacement Tips:
1. Please make sure the part number, specifications, and image match the original screen on your laptop.
2. To replace your screen, you have to remove the battery or disconnect the battery cable from the motherboard. This is to protect your laptop from being damaged by static electricity.
3. Insert the old card between the screen bezel and the display back cover. Pry up the screen bezel and start separating it from the back cover.
4. Slowly pull out the easy-stretch adhesive under the screen, and you can easily remove the screen.
5. Place the LCD screen on the keyboard, disconnect the display cable from the screen to remove the old screen, and then you can install the new screen on your laptop.
6. You can first connect the LCD cable to your screen, then start the laptop to check that your screen is working properly, then fix the screen on the back cover and install the LCD bezel on your laptop.