Xiaomi Mi Max 2Xiaomi Phone Repair

Xiaomi Mi Max 2 Back cover Removal & Replacement

In this guide, we are going to show you how to remove the back cover on Xiaomi Mi Max 2 smartphone. These removal instructions have been made into 3 easy to follow steps.

The full teardown of the Xiaomi Mi Max 2 can be found here.

Repair Tools Needed:
0.8*25 pentalobe screwdriver
Suction cup
Pick
Spudger
SIM Card Eject Tool

Looking for more guides? Follow us on Facebook for all the latest repair news.

1. Removing the SIM card tray and two Pentalobe screws

Powered off your Xiaomi Mi Max 2 and remove the SIM card tray with the SIM Card Eject Tool.

Remove two 0.8*25mm screws securing the back cover to the middle frame.

2. Removing the back cover

After removing two 0.8*25mm screws, open the back cover a little bit with a Suction cup.

Insert a pick between the back cover and the fuselage, and then slowly slide the pick to release the snaps on the middle frame.

In order to prevent the back cover close again, you can insert a pick between the back cover and the body
In the separation of the back cover and the fuselage should be noted that the fingerprint module cable on the back cover is still connected to the motherboard.

3. Disconnect the fingerprint module cable

Disconnect the fingerprint module cable from the motherboard with a crowbar.

You can find the full Xiaomi Mi Max 2 Teardown here. Other parts replacement tutorial, please visit the Mi Max 2 repair guide category.

David Tian

David is the editor @ MyFixGuide. He loves technology, especially good at laptops and mobile phones. In his free time, he loves to take apart the latest mobile phones and laptops.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

7  +  3  =