How to replace the rear camera of the Huawei P10

In this guide, we will show you how to remove and replace the rear camera on the Huawei P10 smartphone.

To remove the rear camera, you need to remove the back cover and disconnect the battery connector from the motherboard.

Teardown is what we do! Follow us on Facebook for the latest repair news.

The complete teardown of the Huawei P10 is available here.

Repair Tools Needed:
0.8 pentalobe screwdriver
Suction cup
Pick
Spudger
Tweezers
SIM Card Eject Tool

1. Remove the SIM card tray and two Pentalobe screws

First, turn off your phone and remove the SIM card tray.

Remove the two Pentalobe screws located at the bottom next to the USB Type-C port.

2. Remove the back cover

Use a suction cup to separate the display unit from the back cover.

Lift the display a little bit with a suction cup and insert a pick.
Slide the pick along the display edge on both sides.

Do not remove the back cover completely. The power button and volume button cables are still connected to the motherboard.

3. Disconnect the power button and volume button cable

Disconnect the power button and volume button cable using a spudger.

Once the cable is disconnected, you can remove the back cover completely.

4. Disconnect the battery connector

Remove the screw securing the metal sheet.

Remove the metal sheet with tweezers.

Disconnect the main FPC from the motherboard with a spudger.

Disconnect the battery connector from the motherboard with a spudger.

5. Remove the rear camera

Remove the screw that secures the metal sheet.

Remove the metal sheet with tweezers.

Peel off the conducting fabric.

Disconnect the rear camera connector from the motherboard.
Now, you can remove the rear camera.

You can find the Huawei P10 Teardown here. For other parts replacement tutorials, please visit the P10 repair guide category.