LeEco Le Pro 3 comes with a unibody metal design. The Le Pro 3 features a 5.5-inch full HD (1080p) display covered with a 2.5D glass and is powered by Qualcomm’s Snapdragon 821 quad-core processor clocked at 2.35GHz paired with 4GB/6GB of RAM. It comes with 32GB/64GB of onboard storage options. On the photography a 16-megapixel rear camera and an 8-megapixel selfie camera. Other connectivity options like dual-SIM card slots, 4G LTE support, Wi-Fi, GPS and Bluetooth. On the software front, it runs on Android 6.0.1 Marshmallow OS based on eUI 5.8 custom UI.
Teardown is what we do! Follow us on Facebook for the latest repair news.
In order to remove the display assembly, we need to heat up the display edges with a heat gun.
Open up the display assembly a little bit with a suction cup, at the same time, insert a guitar pick and slide it along the edges to take off the display.
Under the screen, there is a metal plate, used to isolate the screen and the fuselage, the metal plate covered with a layer of thermal insulation foam. It is used to reduce influenced to the display by the internal temperature.
The bottom board is integrated a vibration motor, a microphone, a USB Type-C port and a speaker, in the microphone and USB Type-C port around the silicone seal to prevent dust entering the fuselage inside.