New Non-Touch Screen for Lenovo Yoga Slim 7 Carbon 13IAP7 13IRP8 5D11G76214 5D11G76218

This is a non-touch screen for Lenovo Yoga Slim 7 Carbon 13IAP7 and Yoga Slim 7 Carbon 13IRP8 laptops. This laptop has a touch and non-touch screen. Please confirm your screen specifications before placing your order.

Note: It is a non-touch screen and is not compatible with laptop models with a touchscreen.

If you don’t know the specifications of your screen, please take a photo of the bottom cover of your laptop and send it to service@myfixguide.com, and we will identify your screen specifications.

We’re giving away 2 easy-stretch adhesives shipped with the screen.

Part Number
5D11G76214

Compatible Part Number
5D11G76218

Features:
1. It is a 100% new screen.
2. This screen has the same specifications as your original screen.
3. Each screen is rigorously tested to ensure that it has no dead pixels.

Specifications:
Size: 13.3-inch IPS Screen
Resolution: WQXGA 2560×1600
Touch: Non-Touch
Backlight Type: LED
Connector: 40 pins
Refresh Rate: 90Hz
Brightness: 400 nits
Color Gamut: 100% sRGB
Aspect Ratio: 16:10
Surface Type: Matte, Anti-Glare
Condition: New, No Dead Pixels
Warranty: One (1) Year

Replacement Tips:
1. Please make sure the part number, specifications, and image match the original screen on your laptop.
2. To replace your screen, you have to remove the battery or disconnect the battery cable from the motherboard. This is to protect your laptop from being damaged by static electricity.
3. Insert the old card between the screen bezel and the display back cover. Pry up the screen bezel and start separating it from the back cover.
4. Slowly pull out the easy-stretch adhesive under the screen, and you can easily remove the screen.
5. Place the LCD screen on the keyboard, disconnect the display cable from the screen to remove the old screen, and then you can install the new screen on your laptop.
6. Glue the two easy-to-pull adhesives to the LCD back cover, insert the screen cable into the screen connector, and then fix the screen on the LCD back cover.
7. You can first connect the LCD cable to your screen, then start the laptop to check that your LCD screen is working properly, then fix the screen on the back cover and install the LCD bezel on your laptop.