A few days ago, the upcoming OPPO K9 Pro was listed on TENAA Certification with the model number PEYM00. However, it seems that the launch of this phone is coming very near as it got listed again on another certification site. This time, it is 3C Certification.
This morning, two new devices from OPPO have been listed on 3C Certification in which one of them is OPPO K9 Pro while the second one is unknown. The 3C Certification of OPPO K9 Pro has revealed that it would feature the same 65W (10V/6.5A) SuperVOOC charger used in OPPO K9.
The second device is OPPO PECM20, which appeared on TENAA Certification a few days ago. This device seems a new entry-level device with only a 10W charger (5V/2A). The same charger was previously used in OPPO’s many entry-level devices.
As previously reported, the new OPPO K9 Pro will feature a 6.43 inches Single Punch-Hole AMOLED Display with Full-HD+ resolution (2400*1080p). The phone would have a thickness of 8.5mm and will weigh around 180g.
Inside the phone, the latest Dimensity 1200 flagship chipset from Mediatek will be used. The chipset is based on a 6nm process, supports Dual SIM 5G. It has a Cortex-A78 Core at 3.0GHz, three Cortex-A78 Core at 2.6GHz, and four Cortex-A55 core at 2GHz.
The OPPO K9 Pro has a triple camera setup which looks like Poco M3’s camera setup, only in terms of appearance. The triple camera lenses are following: 64MP+8MP+2MP. On the front side, a 16MP lens has been used.
In addition to the 65W charger, the OPPO K9 Pro will also use a 4400mAh battery. It is worth mentioning that the phone would also feature an under-display fingerprint sensor. Furthermore, it has the following storage variants: 8, 12GB RAM with 128GB, 256GB Storage, and Black, Blue, and Silver color options.