TeardownXiaomi Mobile PhoneXiaomi Redmi Note
Xiaomi Redmi Note Disassembly
In this guide, I’ll explain how to disassemble Xiaomi Redmi Note to remove the back cover, battery, rear camera, front camera, middle frame and motherboard. Refer to this guide. You can repair your Redmi Note.
Looking for more funny teardown? Follow us on Facebook for all the latest repair news.
Pry up the back cover from the Micro USB port.
Remove the battery, SIM card and TF card.
Remove twelve screws securing the middle frame to the motherboard.
Pry up and remove the middle frame.
Xiaomi Redmi Note’s middle frame
Xiaomi Redmi Note’s speaker on the middle frame
Under the middle frame, you can see two boards – motherboard and bottom board.
Remove two securing the motherboard.
Disconnect the power cable and volume button cable.
Disconnect the rear camera cable and remove the rear camera.
Disconnect the front camera cable and remove the front camera.
All the chips are covered by metal shields.
Redmi Note has two SIM card slots and a TF card slot.
Sensor (left), microphone (right)
Remove the biggest metal shield.
MediaTek MT6592V 1.7GHz processor
MediaTek MT6322GA power management chip
Remove two screws. You can remove the little board.
USB port, support for OTG function.
Thx a Lot to author !! 🙂
its very helpful..
, pls tell, where i can find same 3.5 mm audio jack for earphones, to redmi note ??
Thank you. This was very useful. We had a problem with the display of the phone and just moving the lcd cable fixed it. Keep up the good work.
What type/number of IC PA on this phone?
how i can remove jack connector? i have a new, but i cant remove . thanks
Do you mean 3.5mm earpiece jack? the earpiece jack is soldering on the motherboard.
yes, the 3.5mm jack. soldering with tin? or what? i cant remove. i have a new jack butbi cant replace :d thanks for help