It was reported that OPPO has been working on its upcoming Reno10 series for a long time. Even many leaks and rumors got revealed in the past few weeks. Recently, we got look at another significant leak which has revealed information regarding every aspect of Reno10 and 10 Pro.
This afternoon, the famous blogger @DigitalChatStation revealed the complete specifications regarding the first two models in the Reno10 series. First, we will discuss the standard Reno10 specifications.
As said by the blogger, the standard Reno10 will feature a 6.74 inches single centered punch-hole display with curved edges and supports 120Hz refresh rate, Full-HD+ resolution (2412*1080p), and high frequency dimming to protect the user’s eyes. Inside the punch-hole, there would be a 32MP Sony IMX709 lens.
The phone would have a thickness of 7.58mm and will weigh around 180g. The display would also feature an optical fingerprint scanner, while the middle frame would be made of plastic. In addition, support for NFC and Infrared is also available.
This model would be powered by Snapdragon 778G chipset, a premium mid-range chipset based on a 6nm manufacturing process and features the following cores: 4x Cortex-A78 (1x clocked @2.4GHz, 3x clocked @2.2GHz) P-Cores and 4x Cortex-A55 (clocked @1.9GHz) E-Cores.
In terms of camera, the Reno10 will feature a triple camera setup including 64MP OV64B primary lens, 8MP Sony IMX355 Super Wide-Angle lens, and a 32MP Sony IMX709 Telephoto lens with 2x zoom. Inside the phone, there would be a 4600mAh battery in addition to 80W charging support.
The top variant will feature 12GB RAM, while the model will be available in the following colors: Brilliant Gold, Brilliant Blue, and Moon Sea Black.
Next, we have Reno10 Pro, equipped with a 6.74 inches same single punch-hole display with curved edges. This display would also support the same features, except for the higher resolution, i.e., 2772*1240p. It also features the same 32MP lens inside the punch-hole.
The phone’s thickness is 7.68mm, while the weight is 186g. The display would also feature the same optical fingerprint scanner, while the middle frame is also made of plastic. In addition, support for NFC and Infrared is also available, just like the standard version.
The Reno10 Pro will be powered by Dimensity 8200 chipset in addition to MariSilicon X Imaging NPU. The chipset is based on a 4nm manufacturing process and features the following cores: 4x Cortex-A78 P-Cores (1x clocked @3.1GHz and 3x clocked @3.0GHz) and 4x Cortex-A55 E-Cores (clocked @2.0GHz).
In terms of camera, the Reno10 features the following camera lenses, 50MP IMX890 Primary lens with OIS supported, 8MP Sony IMX355 Super Wide angle lens, and 32MP Sony IMX709 telephoto lens. Inside the phone is a 4600mAh, and the charging speed is 100W (will use OPPO’s SuperVOOC charger). Moreover, the phone would be available in the following color options: Brilliant Gold, Blue, and Moon Sea Black.
Previously, some leaked promotional posters of the Reno10 series revealed that it will be launched on May 24 at 2:30 PM (as per Chinese Timing).
