Meizu M2Meizu Mobile Phone
Meizu M2 Teardown
In this guide, I’ll explain how to disassemble the Meizu M2 to remove the back cover, speaker, camera, battery, and motherboard.
Follow us on Facebook for the latest updates from MyFixGuide.com.
Remove two screws next to the micro-USB port.
Now pry up and remove the back cover.
Remove all screws securing the middle frame and speaker module.
Remove the middle frame and speaker module.
Disconnect the battery connector from the motherboard.
Remove all screws securing the motherboard.
Disconnect the power button cable.
Disconnect the RF antenna cable.
Disconnect the home button cable.
My camera is not opening in the Meizu M2. How do I fix it? Please give me a solution.
Please contact Meizu to handle this question.
Torx numbers?
It is not Torx, and it is a Pentalobe 0.8, similar to the iPhone 4,5 screws.
The Torx must be less than 4. I tried with the 4, and it is too big. I need to replace the screen. Please leave a reply about the Torx measures. Thank you!
The earphone jack is not working. How to fix it?
Hi
Please, how do I change the home button?
Thanks
Could you please tell me where the aerial for the signal is located?