Xiaomi Redmi Note 3 Teardown
In this guide, I will explain how to disassemble the Xiaomi Redmi Note 3 to remove the back cover, battery, speaker, camera, and motherboard.
Looking for more teardown news? Please follow us on Facebook.
The Redmi Note 3 supports dual SIM dual standby and features a dual Micro SIM card slot design.
Pry up and remove the back cover with a guitar pick.
There is a layer of cooling sticker on the back cover.
The Redmi Note 3 uses the FPC 1022 chip from the Swedish fingerprint card company.
Under the back cover, you can access the internal components, including the battery, speaker, camera, and motherboard.
The Redmi Note 3 features a 3.8V, 4000mAh Li-Polymer battery.
The Xiaomi Redmi Note 3 features a 13MP rear camera (Samsung S5K3M2 sensor) and a 5MP front camera, assembled by Oflim.
Close-up of the speaker module
The main chips are covered with graphite thermal pads on their metal shields.
The small board integrates a Micro USB port, a microphone, and a virtual key backlight.
MTK Helio X10(MT6795) processor
MTK 6331P power management chip
MTK 6332P power management chip
MTK 6169V RF chip
Qorvo RF5216 RF chip
Toshiba 16/32GB ROM
MTK 6630QP Combo Wireless Connectivity SOC
Qorvo RF5410 RF chip
Do you have any idea where to buy a whole new body from? I broke mine in anger. Surprisingly, the phone is fully working with everything, even the Touch ID. But the screen is totally broken, and the body is bent. Plz Help! 🙂
Is there a guide on replacing the sound IC?